polystyrene foam
英 [ˌpɒliˈstaɪriːn fəʊm]
美 [ˌpɑːliˈstaɪriːn foʊm]
网络 聚苯乙烯泡沫塑料; 聚苯乙烯泡沫; 泡沫聚苯乙烯; 聚苯乙烯泡沫胶; 聚苯乙烯泡沫塑料板
双语例句
- With an approach of combination of thermal rising test of cubic block in-situ and back analysis, the thermal retardation capability of polystyrene foam board is analyzed.
采用施工现场混凝土立方体非绝热温升试验和反演分析相结合的方法，对聚苯乙烯泡沫塑料板外贴法的保温能力进行分析研究。 - Flame-retardant polystyrene foam board is representative of my unit products, the products are beautiful and durable, quick installation, simple construction, easy accessibility and other properties.
阻燃型聚苯乙烯泡沫板是我单位的代表产品，该产品具有美观耐用、安装快捷、施工简便、拆装方便等性能。 - Ways of making the correction fluid with waste polystyrene foam plastics; Influence of Potassium Permanganate on Coagulation Behavior and Mechanism of Poly Silicon Iron Coagulant
高锰酸钾对聚合硅铁混凝性能的影响及机理 - Open the top of carton and take out Polystyrene Foam Board
拆开纸箱顶部并拿出聚苯乙烯泡沫塑料板 - Coolroom panel is generally constructed from pre-finished steel glue bonded to steam expanded polystyrene foam.
制冷舱板一般是通过将半成品钢粘合起来，以将水蒸气扩散至聚苯乙烯泡沫塑料。 - Experimental study on seismic behavior of high strength concrete shear walls embedded polystyrene foam
内嵌聚苯板高强混凝土复合剪力墙抗震性能试验研究 - The company is specializing in the production of extruded polystyrene foam insulation board with production enterprises.
公司是专业生产绝热用挤塑聚苯乙烯泡沫塑料板生产企业。 - This paper discuss the mechanism and process of making emulsive moistureproof dope for corrugated board with scrap polystyrene foam by selecting proper commix impregnant and emulsion.
本文叙述了以废弃的聚苯乙烯泡沫塑料为原料，选择合适的混合溶剂和乳化剂制取水乳性瓦楞纸箱防潮涂料的机理及过程。 - The process that how to make use of polystyrene foam makes the binder for casting through modifying and plasticizing was discussed.
论述了如何利用废聚苯乙烯泡沫通过改性、增塑合成铸造用的粘结剂的工艺过程。 - Experimental Study on Friction Characteristics of Polystyrene Foam Slab and Cushion
箱子里垫有泡沫塑料以免货物受压聚苯乙烯泡沫板与垫层摩擦特性的试验研究 - This thin floor-heating panel was mainly composed of heat-resistant polyethylene tube, which was embedded in insulation layer of polystyrene foam, and the total thickness was only12mm.
该薄型地暖板主要由耐热聚乙烯管道镶嵌在聚苯乙烯泡沫塑料保温层里构成，总厚度仅为12毫米。 - Full-mold casting is a technique similar to investment casting, but instead of wax as the expendable material, polystyrene foam is used as the pattern.
实型铸造是与熔模铸造类似的技术，但它用做型模的消耗材料是聚苯乙烯泡沫而不是石蜡。 - Application of cast-in-place concrete hollow floor slab with polystyrene foam filling strips
聚苯泡沫材料填充条现浇混凝土空心楼板的应用 - Recovery and reuse of waste polystyrene foam are being paid their attention to.
废旧聚苯乙烯泡沫塑料的回收和再利用一直是人们普遍关注的课题。 - Due to the current development requirement of expanded polystyrene ( EPS) manufacture, a low-cost and portable polystyrene foam cutting system was developed.
针对目前聚苯乙烯泡沫塑料（EPS）加工的发展需要，研制了低成本、便携式的EPS快速成形系统。 - Choice of solvents and solvents ratio on the adhesive from waste polystyrene foam plastic were studied.
研究了利用废聚苯乙烯制备胶粘剂中溶剂的选择及溶剂比例的确定。 - Analysis and Test of Insulation Capacity of Polystyrene Foam Plastics for Building
建筑用聚苯乙烯泡沫塑料的绝热保温性能测试和分析 - Expanded Polystyrene Plastics Using Heat Air Method Study on Production of Coatings from Polystyrene Foam Waste
热空气法生产聚苯乙烯泡沫塑料利用废弃聚苯乙烯泡沫塑料生产涂料的研究 - Using polystyrene foam wastes as elementary component and butyl acrylate, styrene and vinyl acetate as nontoxic modifiers, a new non-solvent emulsion of low cost was prepared.
用废聚苯乙烯泡沫作为主要原料，丙烯酸丁酯、苯乙烯和醋酸乙烯酯作为改性剂制备了一种低成本的无溶剂型聚合物乳液。 - The author introduces the preparation of ready-mixed petroleum resin paint based on waste polystyrene foam.
介绍了利用废弃的包装材料&聚苯乙烯泡沫制备石油树脂调合漆的方法。 - Recovery of Styrene from Waste Polystyrene Foam Plastics
从废旧聚苯乙烯泡沫塑料中回收苯乙烯 - This astical deals with the degradation of polystyrene foam in supercritical water.
本文研究了聚苯乙烯泡沫在超临界水中的降解反应。 - Application of Polystyrene Foam Pattern in the Sand Mould Casting
聚苯乙烯泡沫塑料在普通砂型铸造中的应用 - This article has summarized the applications of wasted polystyrene foam for manufacturing of waterproof coatings, corrosion protective coatings, antirust paint, fire retardant coating road marking paint, etc.
本文对利用废旧聚苯乙烯泡沫塑料制备防水涂料、防腐涂料、防锈涂料、防火涂料、道路标志涂料和其他涂料的研究情况进行了总结。 - The process of research on the high efficient thermal isolated ( HEI) material is introduced, the effects of cement polystyrene foam grain ration on strength, dry density and water absorption ratio of HEI material are discussed in this paper.
本文介绍HEI绝热材料的研究过程，对水泥-泡沫颗粒比对HEI绝热材料的强度、干密度和吸水率等材性的影响进行了讨论。 - Furthermore, there are some good suggestions for the application of these newly much adopted waterproof and thermal-insulation materials ( such as: the UEA expansion waterproof agent, the SBS and APP change-property asphalt roll roofing. the polystyrene foam sheet etc.).
对近期重点推广应用的防水隔热新材料（如UEA膨胀防水剂、SBS和APP改性沥青卷材，聚苯乙烯泡沫板等）的应用，提出了建议。 - The experimental results of cone calorimeter and thermal gravimetric analysis showed that the decomposition and combustion of polystyrene foam underwent a single process.
锥形量热计和热重分析实验结果可以发现，聚苯乙烯泡沫热解和燃烧表现为单一过程。 - Anti-penetration performance of aluminum foam sandwich panels was better than polystyrene foam sandwich panels.
泡沫铝芯体夹层板抗侵彻性能明显优于聚苯乙烯泡沫夹层板。 - The anti-penetration properties of foam-core sandwich plate with different panels and different foam core were studied In this work, the panels are a different thickness of pure aluminum, copper plate; core materials are aluminum foam and polystyrene foam.
本文对不同面板、不同泡沫芯体的夹层板的抗侵彻性能进行了研究，面板分别是不同厚度的纯铝板、紫铜板；芯体材料分别是泡沫铝和聚苯乙烯泡沫材料。